Week 5: It Was Framed

By -
We started to print the face, we have to print it out in small tiny blocks an then put it all together. It will end up being 15 pieces. After finishing the CAD design for the TV, we started building it. We had to get wood from Home Depot. We cut out the front frame of the TV, but that was all we got started with. It took all of class to cut it since we made a mistake. We easily fixed the mistake with glue, so it was not a big problem. Again, we did not have the pieces we wanted for the linear actuator; we are hoping to have them by week 6. Soldering the stepper motor controller and trying to get it to work was unsuccessful. We hope to have that done by the time the pieces for the linear actuator is built

Comments

Post a Comment

Popular posts from this blog

Week 9: One Giant Leap for Group 5

By -
Image
        Over the past few weeks the group has been mostly split between people working on the coding to work with the electronics, and the others building the framework and the parts that will move. This week the project seemed to really be coming together, the electronics and the framework was being put together.         After stressful weeks of spending hours on coding, we finally got the motors to run with the IR sensor to get the whole system to be initiated when people walk in front of it. With the IR sensor working and the motor working, we started on the peripherals: lights and sound. The light was up and running quickly, the sound will hopefully be working by next week. The final circuitry and code is shown below. This ended up taking much longer than we had anticipated.      Now that the face was finished being glued and dried, we put it on the support system to finish all the parts on the linear actuator. Once that was s...
Read more

Week 3: Stepper Up

By -
Image
Continuing with last week, we thought of new ideas on how to push the face through the Lycra sheet. We decided to go with a linear actuator (Figure 1). We are hoping that this is more easy to control and build than a crank or screw mechanism. We spent a lot of time looking up different builds, making it easy to build and keeping cost down. Once we finalized the idea and researched the parts, we ordered what we needed. While many of us were working on the linear actuator, Nick Locantore started working with the Arduino, getting an understanding of how to use it for later. Along with this, we started testing the motors and servos provided. We are provided with small DC motors, which do not provide enough power to do what we need. After talking with the professor, he decided he would by some stepper motors for the class (NEMA17 Stepper motor 1.8 degrees step / 4.8 kg/cm). These stepper motors will hopefully provide us with enough power, we will have to test them once we have them...
Read more

Week 4: Let's Face It

By -
Image
This week we split up an did a couple of things. Since the face is finished, we wanted to print it. Originally we were told that the volume, mostly the length and width, could fit the whole face. Then we were told that we couldn't. So, we had to come up with a way to print the face in smaller parts in order to fit the constraints of the printers we are allowed to use. The design for the TV frame was also started. We want this to look like an older TV. To make the design for the face movement, we have to make a linear actuator. We need to know how to control the stepper-motor required for movement. We worked on the coding and circuitry needed to make it work. As for building it, we got parts, but some of them were not what they said they were and we had to send them back. This set us back and we were not happy. The 3-D CAD design for the face we are printing.
Read more